|

Catalogue


(ML) Catalogue 2016-2017
(ML) Catalogue Classic

share on

share on Facebook share on Twitter share on Google Plus

WIND2200

F000504
Networkable self-powered 2 way full-range speaker system equipped with two 10'' woofers and one HF driver. The woofers are custom built long excursion 3'' voice-coils with super-vented neodymium magnets (in order to minimize the power compression effect) in a symmetrical (D'Appolito) configuration. This is the only configuration that permits both simmetrical polar response and full acoustic sum of the woofers in all the working frequency range. The HF driver is a 3'' voice-coil with neodimium magnet (the same premium and renowned driver in use in the RA16 and SPOT2500). Wind2200 is powered by two class D amplifiers and controlled by a new generation of Montarbo DSP loudspeaker processor which provides FIR - IIR filtering with innovative solutions, audio digital link by AES-EBU standard with sample rate converter and custom network to remote control of speaker system. 135 dB continuous SPL. 2x10'' woofer with 3'' voice coil. HF driver with a 1.4'' throat and a 3'' voice coil, Wide dispersion (60° H x 40° V) constant directivity horn. Montarbo DSP, 24 bit high-performance converters, FIR filters. PPF system: Parallel Processing FIR algorithm. CCDE system: Cascode Conversion for Dynamic Extension. 24 dBu of headroom level input. Montarbo network to remote control. Digital audio in-out AES-EBU. Class-D amplifiers continuos 2000W. Birch plywood cabinet, finished with anti-abrasion paint. APPLICATIONS Main sound system in big clubs, big theatres and open spaces. High quality long throw system. Fixed and semi-permanent installations. Front-fill and side-fill reinforcement, for speech reinforcement, for conventions or conferences. The wide dispersion allows for uniform coverage of the audience, even when using a single system per side (FOH).

Technical Specifications
Enclosure2-way bass-reflex
ComponentsCustom-designed according to Montarbo® specifications
LF2 x 10" woofers (3" voice coil)
HF1 x compression driver (1.4" throat, 3" voice coil)
Constant directivity horn (80° H x 60° V)
Frequency response55 ÷ 20.000 Hz
Continuous SPL135 dB
Electronic cross-over900 Hz
Built-in amplifier2 class-D power units
LF power2000W
HF power500W
Built-in DSPMontarbo®, 24bit conv.
FIR filters
Connections and controlsLine input (balanced XLR) with Volume control
Line link
Digital input
Digital link (balanced XLR)
In-out remote control (RJ45)
Switchable analog/ digital input
Preset select switch
Status LED indicators (on, signal, clipping, thermal warning protection, number preset, analog/digital input)
ConstructionBirch plywood coated with high-impact and chip resistant paint
2 mm steel protection grille with foam
FittingsCarrying handle
Speaker-stand adapter
Dimensions (WxHxD)358 x 866 x 400 mm
Weight32 kg
 
EARTH218

Networkable self-powered subwoofer equipped with two 18" custom built long excursion woofers. Earth218 is powered by a...[+]

MOL1818A SubOne

Band-pass horn-loaded bi-amplified active subwoofer.
Designed for live music performed in medium to large venues...[+]

BX182A

Active Bi-amplified Subwoofer.
BX182A is a high performing yet compact bi-amplified active subwoofer characterized...[+]

MONTARBO AT PROLIGHT & SOUND 2017

Prolight+Sound is one of the most important shows for Pro Audio and Montarbo will be exhibiting, Hall 3.1 B40,...[+]

Montarbo at the Winter Namm Show 2017
Montarbo at the Winter Namm Show 2017[+]
Montarbo was part of Hard Summer Music Festival 2016.
Hard festival took place last 30th-31st of July. This year the concert debuted at Auto Club Speedway of Fontana in California.[+]
Montarbo Sound & Urban Street Art
Some of the most experienced live pro installers have been involved by the sound of our sub and satellites.[+]