(ML) Catalogue 2016-2017
(ML) Catalogue Classic

share on

share on Facebook share on Twitter share on Google Plus



Full-range, twelve-inch, two-way, bi-amplified speaker system, equipped with two class-D amplifiers and controlled by the Montarbo DSP loudspeaker processor which provides FIR filtering with innovative solutions. It belongs to the brand new series unveiled during the ProLight+Sound 2012 event at Musikmesse in Frankfurt. The new parallel processing FIR algorithms (PPF system) provides FIR benefits specifically maintaining llatency at the lowest level.

Fire12A provides a wide dynamic range, eben thanks to the CCDE system which reduces input-saturation risk. Its cabined made of birch plywood and the top-quality tansducers garantee high-level efficiency, laser-focused tone full of warm midrange.

125 dB continuous SPL.
12" woofer with 3" voice coil.
HF driver with a 1" throat and a 1,4" voice coil.
Wide dispersion (80° H x 60° V) constant directivity horn.
Montarbo® DSP, 24 bit converters, FIR filters.
PPF system: Parallel Processing FIR algorithm.
CCDE system: Cascode Conversion for Dynamic Extension.
Class-D amplifiers 900W EIAJ.
Birch plywood cabinet, finished with anti-abrasion paint.

Main sound system in clubs, small theatres and small open spaces.
High quality monitoring system.
Fixed and semi-permanent installations.
Front-fill and side-fill reinforcement, for stage monitoring, for speech reinforcement, for conventions or conferences.
The wide dispersion allows for uniform coverage of the audience, even when using a single system per side (FOH).

Technical Specifications
Enclosure2-way bass-reflex
ComponentsCustom-designed according to Montarbo® specifications
LF1 x 12" woofer (3" voice coil)
HF1 x compression driver (1" throat, 1.4" voice coil)
Constant directivity horn (80° H x 60° V)
Frequency response50 ÷ 20.000 Hz
Continuous SPL125 dB
Electronic cross-over1700 Hz
Built-in amplifier2 class-D power units
LF power750W
HF power150W
Built-in DSPMontarbo®, 24bit conv.
FIR filters
Connections and controlsMicrophone input (balanced XLR) with gain control
Line input (Jack+XLR Combo connector)
Volume control
Switchable Link/Mixed output (balanced XLR)
HiPass switch
BassBoost switch
Status LED indicators (on, signal, clipping, thermal warning protection)
ConstructionBirch plywood coated with high-impact and chip resistant paint
2 mm steel protection grille with foam
FittingsCarrying handle
Speaker-stand adapter
On stage floor angle55°
Dimensions (WxHxD)366 x 580 x 365 mm
Weight20.5 kg

Networkable self-powered subwoofer equipped with two 18" custom built long excursion woofers. Earth218 is powered by a...[+]


Active subwoofer with a class-D amplifier and a built-in stereo Xover for driving the active full-range speakers.


Active subwoofer with a class-D amplifier and a built-in stereo Xover for driving the active full-range speakers.


Active Subwoofer.
Designed to give the best in the most exhausting applications, BX152A combines perfectly with Montarbo...[+]


Active Subwoofer.
Capable of producing extremely high sound pressure levels in spite of its size, BX181A combines...[+]


Active Bi-amplified Subwoofer.
BX182A is a high performing yet compact bi-amplified active subwoofer characterized...[+]

MOL1818 SubOne

Band-pass horn loaded subwoofer.
Designed for live music performed in medium to large venues where the main requirements...[+]


Prolight+Sound is one of the most important shows for Pro Audio and Montarbo will be exhibiting, Hall 3.1 B40,...[+]

Montarbo at the Winter Namm Show 2017
Montarbo at the Winter Namm Show 2017[+]
Montarbo was part of Hard Summer Music Festival 2016.
Hard festival took place last 30th-31st of July. This year the concert debuted at Auto Club Speedway of Fontana in California.[+]
Montarbo Sound & Urban Street Art
Some of the most experienced live pro installers have been involved by the sound of our sub and satellites.[+]