Equipped with a 8” woofer, plus a 1” tweeter for extremely smooth HF reproduction, this active nearfield monitor features a wide and extremely linear frequency response and has been designed keeping in mind the requirements of a reference listening both for professional recording studios or advanced home studios.

M8S feature both unbalanced (RCA) and balanced (TRS/XLR) audio inputs. Onboard preset EQ controls (High Pass Filter and HF Level), plus of course the main level knob, enhance the linearity of the reproduction and optimize listening according to the acoustic conditions of the environment.

M8M is a Multimedia Bluetooth Monitor system designed for use in pairs, where one module is equipped with amplifier, inputs, and controls, and supplies power and audio signal to the second passive module.

This stereo kit is characterised by the versatility of inputs, which multiplies the possibilities of use for this evolution of the classic studio monitor. There are balanced RCA and TRS inputs, an auxiliary input with a minijack connection, and also a Bluetooth receiver, which makes the system perfect for multimedia playback.

On the back of the primary module, you’ll find EQ controls for adjusting high and low frequencies.

Note that on-board controls such as main volume, power switch, the Bluetooth pairing button, and even the AUX Input and headphones OUT are conveniently located in the front of the primary unit for ease of access.

A series of small design solutions that combine the reproduction quality needed for professional use with the small conveniences needed for a chill-out listening experience in the tranquility of your own home.

Equipped with a 6,5” woofer, plus a 1” tweeter for extremely smooth HF reproduction, this active nearfield monitor features a wide and extremely linear frequency response and has been designed keeping in mind the requirements of a reference listening both for professional recording studios or advanced home studios.

M6S feature both unbalanced (RCA) and balanced (TRS/XLR) audio inputs. Onboard preset EQ controls (High Pass Filter and HF Level), plus of course the main level knob, enhance the linearity of the reproduction and optimize listening according to the acoustic conditions of the environment.

M6M is a Multimedia Bluetooth Monitor system designed for use in pairs, where one module is equipped with amplifier, inputs, and controls, and supplies power and audio signal to the second passive module.

This stereo kit is characterized by the versatility of inputs, which multiplies the possibilities of use for this evolution of the classic studio monitor. There are balanced RCA and TRS inputs, an auxiliary input with a minijack connection, and also a Bluetooth receiver, which makes the system perfect for multimedia playback.

On the back of the primary module, you’ll find EQ controls for adjusting high and low frequencies.

Note that on-board controls such as main volume, power switch, the Bluetooth pairing button, and even the AUX Input and headphones OUT are conveniently located in the front of the primary unit for ease of access.

A series of small design solutions that combine the reproduction quality needed for professional use with the small conveniences needed for a chill-out listening experience in the tranquility of your own home.

M4M is a Multimedia Bluetooth Monitor system designed for use in pairs, where one module is equipped with amplifier, inputs, and controls, and supplies power and audio signal to the second passive module.

This stereo kit is characterized by the versatility of inputs, which multiplies the possibilities of use for this evolution of the classic studio monitor. There are balanced RCA and TRS inputs, an auxiliary input with a minijack connection, and also a Bluetooth receiver, which makes the system perfect for multimedia playback.

On the back of the primary module, you’ll find EQ controls for adjusting high and low frequencies.

Note that on-board controls such as main volume, power switch, the Bluetooth pairing button, and even the AUX Input and headphones OUT are conveniently located in the front of the primary unit for ease of access.

A series of small design solutions that combine the reproduction quality needed for professional use with the small conveniences needed for a chill-out listening experience in the tranquility of your own home.

An essential piece of kit for a home recording studio setup, DSI sound interfaces allow for a smooth, user-friendly connection from a laptop to essential studio equipment, microphones or instruments, without compromising on recording quality.

Indeed, DSI’s microphone preamps and high-resolution converters (up to 24-bit / 192kHz) guarantee a clear and pristine sound, low noise level, and a wide dynamic range to capture any detail of recordings. Moreover, a dedicated ASIO driver helps to significantly reduce latency times.

Featuring 2 combo Inputs with Phantom Power and Instrument switches, plus monitor and headphone outputs, DSI-22 interface works seamlessly with Mac or PC, and its design allows for quick access to onboard controls and connectors (gain, monitor and headphones levels) from the front panel. DSI-22 also features a MIX knob enabling users to adjust headphones balance between the Input signals and the recorded signal, which is extremely useful for monitoring purposes.

The compact and lightweight design perfectly fits any on-the-go music production and recording requirement.

DSI interfaces come with a USB cable and a 6.35mm to 3.5mm stereo adapter included. In order to use DSI interfaces on Windows, please install the provided drivers (Drivers compatibility: Windows 10, 32-bit or 64-bit).

An essential device for setting up a home recording studio, DSI audio interfaces allow a smooth and easy connection between a laptop and studio equipment, microphones, or instruments, without compromising recording quality.

DSI’s microphone preamps and high-resolution converters (up to 24-bit / 192 kHz) ensure a clear and pristine sound, low noise levels, and a wide dynamic range to capture every detail of your recordings. Additionally, a dedicated ASIO driver helps significantly reduce latency times.

Featuring 2 combo inputs with phantom power and instrument switches, along with monitor and headphone outputs, the DSI-22 interface works seamlessly with Mac or PC. Its design allows quick access to onboard controls and connectors (gain, monitor, and headphone levels) from the front panel. The DSI-22 also includes a MIX knob, which lets users adjust the balance in headphones between the input signals and the recorded signal—extremely useful for monitoring.

Its compact and lightweight design is perfect for any mobile music production and recording needs.

DSI interfaces come with a USB cable and a 6.35mm to 3.5mm stereo adapter included.

Driver compatibility: Windows 10, 32-bit or 64-bit

The aluminum inlay ear cup body mounts a 40mm driver; the 32-ohm system impedance ensures an optimal sound pressure with all types of devices, while the wide frequency response allows for the most detailed listening experience even in the lowest frequencies.

A closed-back circumaural design provides the user with good isolation from external interferences, while the eco-leather-covered memory foam pads and headset provide maximum comfort.

The complete headset comes with 3 different removable cables: 2 x 3m flat or helix cables with mini-jack connector, and 1 x 1m flat cable with mini-jack connector, plus 1 x stereo mini-jack-jack adapter and a soft case.

MM500X is a wide-diaphragm condenser microphone providing extended frequency response and wide dynamics.
This is a device allowing professional users to capture in full detail all the vocals’ subtle nuances as well as the full richness of an acoustic instrument like a guitar or piano.

Equipped with 48V phantom power and featuring a cardioid polarity, the MM500X allows high-quality recordings even in challenging environmental conditions and captures distortion-free high sound pressures from amplifiers, horns, and percussion instruments.

MM500X comes with a swivel mount with a locking ring nut to easily attach the microphone to a stand or tabletop stand, plus a heavy-duty neoprene case.

MM500 U is the USB version of the condenser microphone, designed for quick operations with a direct connection to a computer (PC or Mac) with no need for an audio interface. The ideal solution for podcasts or live music streaming, but also for fast audio recordings keeping an eye on audio quality.

MM500 U features a headphones output and a knob for the headphone volume, plus a dedicated switch allowing users to choose between monitoring audio in real-time or listening to instrumental playback while performing.

The MM500 U microphone comes complete with a swivel mount, metal table stand and a 1.2m USB cable included: everything you need to set up high-quality audio streaming or recording in seconds.