Fiveo - D12A

New arrival

D12A: RMS Power 500W (400W LF class D, 100W HF class AB). Components: woofer 12" and a driver 1,4" neodymium. SPL Max (calcolated): 122dB. Frequency Response: 60Hz - 20kHz (-10dB). More protection like Overheating protection ...

Product code: 5O01309 Brand:
Share:

D12A: RMS Power 500W (400W LF class D, 100W HF class AB).

Components: woofer 12" and a driver 1,4" neodymium.

SPL Max (calcolated): 122dB.

Frequency Response: 60Hz - 20kHz (-10dB).

More protection like Overheating protection / short-circuit protection / compressor.

Rear panel presents D12A with Input COMBO connector and XLR OUT for LINK connection. Control: volume, Power On with green LED verde and ground lift. Red Led for advertis Clip Limiter.

Power Supply: 110-120V~50/60Hz or 220-240V~50/60Hz. Vented Cabinet of ABS with rubber feeth.

Dimensioni: 618 x 430 x 350mm. Weight: 17,1Kg.

USB Player, Micro SD Card and optional Bluetooth card.

Speakers FiveO Series give more power at good price.

These products are design to provide a cost effective high grade solution, and they can be used for all kinds of applications, such as churches, conference center, disco, etc.

Technical Specification
Acoustic Data
Frequency Response [-10dB]55Hz - 20kHz
Max SPL122dB
HF1x1"
HF Voice Coil1,4"
Crossover Frequency1,8kHz
LF12"
LF Voice Coil2"
Amplifier
Amp ClassD + AB
Peak Power1000W (800W + 200W)
RMS Power500W (400W + 100W)
Self-rotating display
Processor
ControllerVolume / Switch-on Control with green LED / Clip Limiter / red LED / Ground Lift
LimiterYES
Dual Active Peak, RMS, ThermalOverheating protection / short-circuit protection / compressor
Input Section
Signal inputINPUT1- Mic Input on XLR Type connector and 6,3mm jack / INPUT2- Line Input on XLR-Type connector and 6,3mm/3,5mm jacks
Signal OutBalanced outputs L-R (2-XLR-M @15k Ohm)
USB ConnectorOptional: USB & Micro SD CARD, Bluetooth
Mechanics
HousingABS
FlyableSI
Handles1
Pole mountSI
Width430mm
Height618mm
Depth350mm
Weight17Kg
User Manual -> (ML) Owner's manual
User Manual -> Datasheet
Loading