Fiveo - RIO A2

New arrival

RIO A2 The FiveO RIO A2 active D.I. box is useful for adapting high impedance or power signals to low impedance signals at microphone level. It features a XLR and jack unbalanced input useful to receive line signals from +2 to +42 dBm which can ...

Product code: 5O01341
Brand:
Share:

RIO A2

The FiveO RIO A2 active D.I. box is useful for adapting high impedance or power signals to low impedance signals at microphone level. It features a XLR and jack unbalanced input useful to receive line signals from +2 to +42 dBm which can be attenuated of 20 or 40 dB through two switches.

A Link through a jack allows to take the signal directly in parallel to the input sockets, while it is possible to pick up the balanced signal appropriately treated through an XLR connector placed on the rear panel. The D.I. Box can be powered through a special switch, through phantom power or through a 9V battery that can be easily inserted
into the dedicated compartment. The front panel features include a Gnd-lift and a Polarity-Reverse switch, and a further useful High-cut switch that eliminates frequencies above 8 kHz.

TECHNICAL SPECIFICATIONS
CharacteristicsActive Direct Box
Frequency range10 Hz:200 kHz +/- 1 dB
InputJack plugs mono 1/4"" unbalanced IN/Link out
Input noise-105 dB
THD+N @ 1 kHz / 1 dBm<0,01%
Input ImpedanceMax 100 Kohm
OutputXLR balanced out
Balanced transformer
Output impedance600 ohm
Phantom: Yes 18V48 V
Weight0,8 (1,76) Kg (lbs)
Dimensions128 (5) x 123,5 (4,86) x 44,2 (1,74) mm (inch)
datasheet -> (EN) datasheet
User Manual -> (EN) owner's manual
Loading